5 IN 1 Hydraulic Ironworker Machine

5 in 1 Hydraulic Iron Worker Machine

The 5 IN 1 Hydraulic Iron Worker Machine is a versatile and efficient solution designed to perform multiple functions, including punching, shearing, notching, and bending of metal materials. With its advanced hydraulic system, this machine ensures high precision, power, and durability, making it ideal for various industrial applications. It combines five essential operations into a single, compact unit, saving space and increasing productivity. Engineered for ease of use and minimal maintenance, the 5 IN 1 Hydraulic Iron Worker Machine is perfect for industries requiring high-performance metalworking equipment with reliable results.

STANDARD EQUIPMENT

Variable Stroke Adjustment With Limit Switch
Quick Change Die Holder 3 in 1 – 50, 73 & Angle
Punching
Hydraulic Hold-Down

Back Gauge
Die Light

Operating Mode (Inching/Auto)
Emergency Stop Switch
Movable Foot Switch
Table for Punch StationOperation & Maintenance Manual Book

OPTIONAL EQUIPMENT

Extra Throat Depth
NC Gauge

Standard Blade Sets Along With The
Iironworker Machine

Punch and Die – 10 Set (Diameter between 8 mm to 20 mm)
Angle Cutting Blade Punching
Flate Bar Shearing Blade

Any One Set Of Die:

Round Bar & Squre Bar
I Section Die
C Section Die

Customized Die

Any One Set Of Die:

V-Notching Die
Square Notching Die

FRAME CONSTRUCTION

Ironworker Machine Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the ironworker machine is never disturbed.

TABLE & SLIDE (Ram)

Table are made of high grade heavy duty cast iron and properly seasoned. Slide are fabricated from IS-2062 graded rollated ste el plates is deeply reinforced and fines ironworker machines after stress reliving. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.

CYLINDER

The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

HYDRAULIC SYSTEM

The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise system is placed on the rear side of ironworker machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and ironworker machine from overload. This system is driven by an electric motor of reputed brand and is coupled with a pump capable if generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

ELECTRICAL CONTROL PANEL

The electrical control panel is located on the left hand side of the hydraulic ironworker machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.

Technical Parameters

Model No.

RIW 50

RIW 60

RIW 75

RIW 90

RIW 120

RIW 150

PUNCHING

Punching Pressure

50 Ton

60 Ton

75 Ton

90 Ton

120 Ton

150 Ton

Punch Capacity (Diameter x Thickness) Material Strength Of 450 N/MM'

ø 20 x 15

ø 35 x 8

ø 22 x16

ø 45 x 8

ø 22 x 20

ø 50 x 9

ø 26 x 22

ø 50 x 12

ø 26 x 26

ø 50 x 15

ø 33 x 27

ø 50 x 18

Throat Depth

175

275

310

350 Maximum Stock Length

60

100 Cycles I Min. (20mm Stroke)

30 25 / 32

20

21

20 Cycles I Min. (20mm Stroke)

30 25 / 32

20

21

20 Working Height Up to Die

910

950 1020

FLAT SHEARING

Flat Bar Shear

250 x 8

300 x 12

350 x 15

460 x 15

610 x 16

610 x 18

(Width x Thickness)

180 x 12

240 x 16

240 x 20

300 x 20

400 x 20

400 x 25

Blade Length

260

310

360

465

620 Angle Flange Trim

65

75

100 Working Height

800

820

920

950 ANGLE SHEARING

At 90 Shearing

80 x 80 x 8

100 x 100 x 10

130 x 130 x 13

152 x 152 x 13

152 x 152 x 15

152 x 152 x 18

At 45 Miter Shearing

50 x 50 x 6

65 x 65 x 8

80 x 80 x 10

Working Height

1080

1150

1160

BAR SHEARING

Round Bar Shear (Dia.)

25

32

40

50 Square Bar Shear

25 x 25

32 x 32

38 x 38

50 x 50

Channel Shear

-

100*

130*

152*

180*

I Beam Shear

-

100*

130*

152*

180*

Working Height

1150

1300

1315

NOTCHING

Rectangular (W x D x T)

30 x 60 x 5

50.8 x 90 x 6

50.8 x 90 x 9

50.8 x 90 x 12

63.5 x 90 x 12

63.5 x 90 x 13

Vee-Natcher(Side x Side x T)

60 x 32 x 6*

80 x 50 x 9*

90 x 90 x 8*

90 x 90 x 10*

105 x 105 x 12*

105 x 105 x 13*

Large Vee-Natcher (Side x Side x T)

-

145 x 145 x 8

145 x 145 x 10

145 x 145 x 12

145 x 145 x 13

Working Height

850

860 SPECIAL TOOLING

Single Vee Press Brake (W x T)

160 x 6

250 x 10

250 x 15

250 x 20

Multi Vee Press Brake (W x T)

-

400 x 8

500 x 5

700 x 5

Angle Bending

65 x 6

76 x 8

102 x 6

102 x 8

102 x 13

Pipe Notching (Dia.)

114 OTHER

Electric Power (HP)

5 HP

7.5 HP

10 HP

15 HP

Net Weight (Approx.)

1800 kg

2300 kg

2600 kg

2950 kg

3400 kg

3800 kg

Machine Dimension (Approx.) (LxWxH)

1360 x 700 x 1450

1750 x 750 x 1800

1970 x 800 x 2000

2100 x 820 x 2060

2340 x 860 x 2110

2420 x 980 x 2150

Quick Links

Our Products

Contact Details

Enquire Now